| Author |
Thread |
|
marchhare
Senior Member
United States
370 posts
Joined: Jul, 2003
|
 Posted - 2007/12/04 : 20:17:36
Ok so I got in my studio to check on my equipment.To my horror I had about a half cup of water that was dripping on the tone arm and on my turntable.I pulled the plater off to see if any got in side the table it self , did not see any water under the platter.I was a bit relieved by this but I am letting them try for afew days before turning them on.I think the first test will be tomorrow.I can only HOPE that one table still works.We will see
__________________________________
HaPpY UnBirThDaY WouLd you LiKe soMe TeA??
You are, the DJ number one!
Alert moderator 
Edited by - marchhare on 2007/12/05 20:23:23 |
silver
Admin
Japan
12,577 posts
Joined: Feb, 2001
894 hardcore releases
|
Posted - 2007/12/05 : 06:17:46
You might want to use a hair dryer for a little on it, just don't get it too hot.
Alert moderator
|
Hard2Get
Advanced Member
United Kingdom
12,837 posts
Joined: Jun, 2001
|
Posted - 2007/12/05 : 13:21:02
quote:
Originally posted by marchhare:
cry for afew days before turning them on.
What an ironic typo :P
Alert moderator
|
dj_deano
Advanced Member
United Kingdom
1,023 posts
Joined: Jun, 2005
|
Posted - 2007/12/05 : 14:42:34
Yeah get a hair dryer on it but dont hold it too close.
__________________________________
REACTION DIGITAL MP3 STORE NOW OPEN!
HTTP://WWW.REACTION-EVENTS.COM
Alert moderator
|
Dain-Ja
Advanced Member
Canada
1,983 posts
Joined: Oct, 2004
|
Posted - 2007/12/05 : 19:22:12
don't use a hair dryer
put your deck next to a dehumidifier (running at max) overnight or for a couple of days if you can
that'll get rid of any moisture inside and on the circuitry without damaging anything with heat
I did this on many electronic devices I dropped in water and they worked fine after (as long as there was no short circuit when it was soaked and you remove all moisture before turning the device back on it will work fine)
__________________________________
Producer/DJ/Label owner
Rush Delivery Records
Visit makemeRUSH.com for music from the ONLY North American hardcore label pressing vinyl!
FREE track every Monday: http://www.rushdeliveryrecords.com/?p=229
Alert moderator
|
marchhare
Senior Member
United States
370 posts
Joined: Jul, 2003
|
Posted - 2007/12/05 : 20:25:30
I took the platter off and checked around I didnt see any wter or moisture.I think I am going to let it dry for another day or so before turning it on .
__________________________________
HaPpY UnBirThDaY WouLd you LiKe soMe TeA??
You are, the DJ number one!
Alert moderator
|
marchhare
Senior Member
United States
370 posts
Joined: Jul, 2003
|
Posted - 2007/12/18 : 19:22:54
They work.I was so hapy when I turned them on and they didnt blow up.Threw down a mix and the pitch control was fine.Happy Happy times
__________________________________
HaPpY UnBirThDaY WouLd you LiKe soMe TeA??
You are, the DJ number one!
Alert moderator
|
Printer friendly
