| Author |
Thread |
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
 Posted - 2015/01/29 : 20:54:40
Right, I need some advice. I haven't looked at a new piece of DJ equipment since I put a pair of CDJ 800MK2's and a DJM400 way back in 2008. Now, I've still got those - but they're at my parents place, and I don't have room for a permanent set-up in my flat, really.
Sooo, was thinking of throwing a few hundred quid at an all in one kinda thing that I can use with my laptop.
Something like this:
http://www.pioneer.eu/uk/products/44/1992/34209/DDJ-SB/page.html
It's one of the cheaper models. Just two hundred quid, I think. I really, really don't need anything fancy at all.
I know this comes with an intro version of Serato, and you can buy the full version as well. But would this work with, say, Virtual DJ, as well?
__________________________________
http://HardcoreHighlights.com/
Alert moderator 
Edited by - _Jay_ on 2015/01/29 20:55:53 |
wong
Advanced Member
United Kingdom
2,991 posts
Joined: Feb, 2006
|
Posted - 2015/01/30 : 07:02:39
Numark mixtrack pro 2, cheap n chearful
__________________________________
intensify the treatment
Alert moderator
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
Posted - 2015/01/30 : 07:04:12
Similar price to the one I'm looking at.
But, same question applies, are these things compatible with any kind of DJing software? Or only Serato?
__________________________________
http://HardcoreHighlights.com/
Alert moderator
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
Posted - 2015/01/30 : 13:09:23
Just ordered this:
https://www.decks.co.uk/products/dj-controllers/pioneer/ddjsb#.VMuCQ2jke-0
And a pair of these:
https://www.decks.co.uk/products/studio-monitors/krk/rokit-5-g3#.VMuCXGjke-0
I'll let ya know when the first mix is done. :-)
__________________________________
http://HardcoreHighlights.com/
Alert moderator
|
Captain Triceps
Advanced Member
United Kingdom
2,216 posts
Joined: Dec, 2011
|
Posted - 2015/01/30 : 13:52:44
Too late for you now, of course, but I have a Numark Omni Control.
The jog wheels are smaller then I'd like but it has a built in sound card which is very handy, and it's cheap as chips now, too. Compatible with everything I've tried it with.
__________________________________
Some of my remixes, original tracks and mixes here:
https://soundcloud.com/bradders-tracks-and-remix
https://soundcloud.com/bradders1982
https://soundcloud.com/paulbradley1982
Alert moderator
|
wong
Advanced Member
United Kingdom
2,991 posts
Joined: Feb, 2006
|
Posted - 2015/01/30 : 14:39:44
quote:
Originally posted by _Jay_:
Similar price to the one I'm looking at.
But, same question applies, are these things compatible with any kind of DJing software? Or only Serato?
Sorry mate i didnt read it properly. But yes it works with vdj and traktor. Not sure about anything else. Too late now anyway innit
__________________________________
intensify the treatment
Alert moderator
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
Posted - 2015/01/30 : 15:10:39
Cheers lads! Not to worry. Think I'll be happy enough with what I went for.
I am prone to spontaneous purchases without properly researching. It's one of my best qualities.
__________________________________
http://HardcoreHighlights.com/
Alert moderator
|
Captain Triceps
Advanced Member
United Kingdom
2,216 posts
Joined: Dec, 2011
|
Posted - 2015/01/30 : 16:31:28
Give us a review when it arrives. I'm considering a new controller sometime.
__________________________________
Some of my remixes, original tracks and mixes here:
https://soundcloud.com/bradders-tracks-and-remix
https://soundcloud.com/bradders1982
https://soundcloud.com/paulbradley1982
Alert moderator
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
Posted - 2015/01/30 : 17:06:21
Yeah will do mate, no wozza.
It's getting delivered tomorrow! Might have an early review for you on Sunday, but I'll need to use it thoroughly before doing a proper review.
Any key things you're looking for?
__________________________________
http://HardcoreHighlights.com/
Alert moderator
|
Captain Triceps
Advanced Member
United Kingdom
2,216 posts
Joined: Dec, 2011
|
Posted - 2015/01/30 : 17:20:49
quote:
Originally posted by _Jay_:
Yeah will do mate, no wozza.
It's getting delivered tomorrow! Might have an early review for you on Sunday, but I'll need to use it thoroughly before doing a proper review.
Any key things you're looking for?
I like on my controller how there are two outputs, so I can connect each channel to a separate line in on my external mixer - I've just seen that there is only one output on your new one. I don't know why but I've never liked using the volume and fader on the controller, maybe this new one feels better.
Also scratching is a pain in the arse, perhaps because of the tiny jogwheels, don't really think it was made for that sort of thing anyway. Thing is I like a good scratch!
__________________________________
Some of my remixes, original tracks and mixes here:
https://soundcloud.com/bradders-tracks-and-remix
https://soundcloud.com/bradders1982
https://soundcloud.com/paulbradley1982
Alert moderator
|
_Jay_
Advanced Member
United Kingdom
6,868 posts
Joined: Oct, 2011
|
Posted - 2015/01/30 : 20:13:27
Roger that mate, noted.
__________________________________
http://HardcoreHighlights.com/
Alert moderator
|
Guest
Advanced Member
United Kingdom
1,511 posts
Joined: Feb, 2015
|
Posted - 2015/02/28 : 13:51:12
you should have brought a vms4.1 https://www.decks.co.uk/products/dj-controllers/american-audio/vms41#.VPHG-MoX7yE
and used this mapping http://traktorbible.com/freaks/mappingview.aspx?id=870
although there is a 4 deck mapping for the ddj-sb, but it has less buttons so its more hassle http://traktorbible.com/freaks/mappingview.aspx?id=871
__________________________________
youtube channel / soundcloud and mixcloud suck
Alert moderator
|
Printer friendly
